Special 335 M/S

Name: Special 335 M/S
Brand: MACC

SPECIAL 335 M/S

Description

TECHNICAL DATA AND STANDARD EQUIPMENT

Vertical rotation on pivot with adjustable taper roller bearings, no play.
Belt drive with two-speed motor and special gearbox with bronze gear and hardened, ground worm screw.
Adequately sized flywheels.
Robust belt guides with sealed bearings and adjustable carbide plates.
Belt tensioning via electromechanical device with blade-rotation microswitch control.
Bench vice with quick-approach device.
Large rotating material support table
Safety device against accidents on the flywheel cover, control and blade.
Removable chip tray
Cutting thickness 1.2 mm
Cutting range 45° left, 60° right
Adjustable stop for same-size cuts
0.06 kW electric pump for belt cooling
Operation:
The cutting cycle starts with the start button.
The machine
closes the vice and starts the band motor
lowers the frame to make the cut
the frame returns to its starting position
stops the band motor
opens the vice
Manual cutting also possible
ACCESSORIES ON REQUEST

Motor monofásico 75 m/1?
Speed variator 20 to 90 m/1?

Technical data

Power: 0,75 - 1,1 kW
Cutting speed: 38 - 78 m/min
Max. jaw opening: 330 mm
Blade dimensions: 3010 × 27 × 0,9 mm
Weight: 470 kg
Cutting capacity at 0°: Ø 260 mm · cuadrado 250 mm · rectangular 180 × 330 mm
Cutting capacity at 45° left: Ø 180 mm · cuadrado 155 mm · rectangular 60 × 225 mm
Cutting capacity at 45°: Ø 215 mm · cuadrado 200 mm · rectangular 160 × 210 mm
Cutting capacity at 60°: Ø 130 mm · cuadrado 130 mm · rectangular 130 × 140 mm

Documentation

Download data sheet (591.2 KB)