Cut-off machines, laser cutting and high-output equipment to cut tube and profile with industrial precision.
RSA
Automation Solutions for Sawing Centres
From feeding to stacking: the right RSA module for every step of your sawing line, freely combinable and expandable at any time.
- Automática
- Alta producción
OMP
K2 Multi-Head Cutting Saw
Automatic multi-head cutting saw for simultaneous cutting of tubes up to 90 mm in diameter, with capacity of up to 4,500 pieces/hour.
- Hierro / Inox
- Automática
OMP
Cyclomatic 600 L Disc Saw
Automatic disc cutting saw for aluminium and light alloys, with diameters up to 200 mm and ±0.05 mm precision.
- Aluminio
- Automática
MACC
Special 391 AV
- Hierro / Inox
- Automática
MACC
Special 391 AVG
- Hierro / Inox
- Automática
MACC
Special 410 AE
- Hierro / Inox
- Automática
MACC
Special 411 A
- Hierro / Inox
- Automática
MACC
Special 350 A
- Hierro / Inox
- Automática
MACC
Special 390 A
- Hierro / Inox
- Automática
MACC
Special 391 A
- Hierro / Inox
- Automática
OMP
Cyclomatic 370
Automatic cut-off machine for straight cutting of light alloys, with high precision, servo-controlled feed and variable disc speed.
- Hierro / Inox
- Automática
Cut-off machines and laser tube cutting. Depending on your geometry and reference mix.
Disc cutting or contactless laser cutting, in standard and high-output ranges.
Laser adds flexibility when production combines many different parts.
Which cutting technology do you need?
Cutting tube and profile is mainly solved with two technologies: the cut-off machine, which cuts with a disc, and laser, which cuts without physical contact. The decision depends on the part’s geometry and how much your production varies between references.
Cut-off machine or laser cutting
The cut-off machine handles straight or miter cuts at medium and high volumes, with contained operating cost. Laser tube cutting brings precision to complex geometries — bevels, holes, marking — without a tooling change between different references, which makes it more flexible when production combines many different parts.
Standard production or high output
Within both technologies, the catalog includes high-output equipment and multi-head models, which cut several parts per cycle. They make sense when the pace per shift is high and stable, in exchange for a higher investment and more maintenance than a single-head machine.
One material or several
If your production combines carbon steel, stainless steel and aluminum, confirm that the equipment accepts cutting parameters for all three: aluminum in particular requires a specific disc and feed speed compared to steel and stainless, which do share similar parameters with each other.
Related searches iron / stainless steel · macc · manual · semi-automatic · tilting · automatic · laser tube cutting · cut-off machines
Official distributors of the brands that set the standard in the industry.
