Cut-off machines, laser cutting and high-output equipment to cut tube and profile with industrial precision.
RSA
Automation Solutions for Sawing Centres
From feeding to stacking: the right RSA module for every step of your sawing line, freely combinable and expandable at any time.
- Automática
- Alta producción
RSA
RASACUT SC Cutting Saw
Universal, extremely rugged high-performance saw, with a wide range of applications from small batches to series production.
- Alta producción
RSA
Rasacut XS
High-performance automatic saw for cutting small-diameter tube, with automatic feed and up to 5,000 parts per hour.
- Alta producción
RSA
RASACUT XS Cutting Saw
Automatic disc cutting saw for tubes, with straight and angled cuts up to ±45° (automatic rotation and ±60° optional).
- Alta producción
RSA
RASACUT XXL Sawing Centre
Single-cut saw for diameters from 20 to 170 mm, with up to 90% reduction in sawing time compared to band saws.
- Alta producción
Cut-off machines and laser tube cutting. Depending on your geometry and reference mix.
Disc cutting or contactless laser cutting, in standard and high-output ranges.
Laser adds flexibility when production combines many different parts.
Which cutting technology do you need?
Cutting tube and profile is mainly solved with two technologies: the cut-off machine, which cuts with a disc, and laser, which cuts without physical contact. The decision depends on the part’s geometry and how much your production varies between references.
Cut-off machine or laser cutting
The cut-off machine handles straight or miter cuts at medium and high volumes, with contained operating cost. Laser tube cutting brings precision to complex geometries — bevels, holes, marking — without a tooling change between different references, which makes it more flexible when production combines many different parts.
Standard production or high output
Within both technologies, the catalog includes high-output equipment and multi-head models, which cut several parts per cycle. They make sense when the pace per shift is high and stable, in exchange for a higher investment and more maintenance than a single-head machine.
One material or several
If your production combines carbon steel, stainless steel and aluminum, confirm that the equipment accepts cutting parameters for all three: aluminum in particular requires a specific disc and feed speed compared to steel and stainless, which do share similar parameters with each other.
Related searches iron / stainless steel · macc · manual · semi-automatic · tilting · automatic · laser tube cutting · cut-off machines
Official distributors of the brands that set the standard in the industry.
